- #Signalscope by faber acoustical for mac os
- #Signalscope by faber acoustical serial number
- #Signalscope by faber acoustical generator
- #Signalscope by faber acoustical pro
- #Signalscope by faber acoustical software
The Room Analyzer tool, available for in-app purchase in Electroacoustics Toolbox, now calculates room parameters in whole or 1/3-octave frequency bands from impulse response data that has been sampled at higher sample rates (88.2, 96, 176.4, and 192 kHz), in addition to sample rates of 44.1 and 48 kHz that were supported previously.
#Signalscope by faber acoustical pro
Electroacoustics Toolbox 3.7, SignalScope Pro 3.7, SignalScope 3.7 and SignalSuite 4.7 are all 64-bit applications that have been built for Yosemite.
#Signalscope by faber acoustical for mac os
These apps all require Mac OS version 10.7 or later.Īll Faber apps for Mac OS received updates to improve their compatibility with Yosemite (Mac OS 10.10). Various bugs and potential instabilities in each app have been corrected. Making calibrated acceleration measurements is as easy as plugging in the 333D01 and getting started with the analysis tool of your choice.
#Signalscope by faber acoustical serial number
An internet connection is required to download sensitivity information for the microphone.Įach of these apps also directly supports the Digiducer 333D01 USB digital accelerometer, and can automatically load serial number and sensitivity calibration information directly from the device. Making calibrated sound level measurements is as easy as plugging in the UMIK-1 or UMM-6, typing in its serial number, and getting started with the analysis tool of your choice (the serial number only needs to be entered once, after which the app will remember the microphone sensitivity). Sensitivity calibration data for these mics can be downloaded automatically, just by entering the mic’s serial number. Versions 3.8 of SignalScope, SignalScope Pro, and Electroacoustics Toolbox for Mac OS now offer built-in support for USB measurement microphones from miniDSP and Dayton Audio as well as the model 333D01 USB accelerometer from Digiducer.Įach app directly supports the miniDSP UMIK-1 and Dayton UMM-6 USB measurement microphones. Modular architecture for rapid development of additional tools, with the potential to allow third parties to develop custom plug-ins No arbitrary limits on how many devices or channels are used, or on sample rates or signal formats-these are limited only by your hardware Work with multiple independent audio devices simultaneously Saving complete configurations and data in project filesĮxporting data to ascii text files for easy import into other applications Support for units, including Volts, Amps, Pascals, and Engineering Units Quartz-based graphics for high-resolution still images and printsĪdvanced control over input and output devicesĭevice and individual channel calibration Hardware-accelerated OpenGL graphics for fast real-time plotting Noise Dosimeter for convenient noise dose measurements
#Signalscope by faber acoustical generator
Signal Generator for real-time synthesis of various waveforms and test signals X/Y Plotter for creating Lissajous figures in real time Sound Level Meter for measuring instantaneous and time-averaged sound pressure levels Multi-channel Oscilloscope for real-time viewing of input signal waveforms Multi-channel Meter Bridge for a quick look at input signal levels Multi-channel FFT Analyzer for real-time spectral analysis of input and output signals
Multi-channel Dual FFT Analyzer for transfer function and impulse response measurements of electrical, acoustical, and electroacoustic systems (filter circuits, listening rooms, loudspeakers, etc)
#Signalscope by faber acoustical software
The software is designed to work with any Mac-compatible audio hardware and supports multiple channels of 8, 16, 24, or 32-bit data with sample rates as high as the hardware will support. Electroacoustics Toolbox enables precision measurements of acoustic quantities, such as equivalent and time-weighted sound levels, as well as acoustic and electroacoustic systems, such as listening rooms and loudspeakers. The Faber Electroacoustics Toolbox (FEaT) is a modularized, multi-channel multi-analyzer, offering real-time data acquisition and analysis of electrical, acoustical, and electroacoustic signals and systems.įEaT brings powerful new tools to the Macintosh platform for multi-channel, audio-band data acquisition and real-time analysis of electrical, acoustical, and electroacoustic signals and systems.
0 kommentar(er)
